Tilta WLC-T03-K5 Nucleus-M Wireless Lens Control System Partial Kit V
Tilta WLC-T03-K5 Nucleus-M Wireless Lens Control System Partial Kit V

Tilta Nucleus-Nano: Wireless Lens Control System with Nucleus-M Motor ( P-Tap to 7-pin cable include

1'324.05 CHF
1'431.30 CHF inkl. 8.1% MwSt
Artikel-Nr.
521.WLC-T03-K5
Garantiezeit
Standart Hersteller Garantie
Verfügbarkeit
Nicht an Lager (Verfügbarkeit unbekannt)

Tilta Nucleus-M: Wireless Follow Focus System WLC-T03

 
The Nucleus-M is a revolutionary wireless follow focus system. Have full control of focus, iris, and zoom on Cine lenses or compatible "cine-moded" DSLR lenses. Ideal for 3-axis gimbals, shoulder mounts systems, and drone shoots. 
 
  • The Nucleus-M is a wireless 3 Channel system.
  • Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
  • Each motor has a built-in MDR unit, saving space and setup time.
  • A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
  • There is no limit on the amount of motors an operator can attach per channel.
  • The FIZ hand unit and two handle grips have a wireless range of 1000 feet.
  • The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory.
  • Both hand grips and FIZ hand unit run off (2) 18650 batteries. (Batteries are NOT included.)
  • When fully charged the batteries in the hand grips can last up to 2 days.
  • The batteries in the FIZ unit can last up to 10 hours.
  • FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips.
  • 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
  • Motors can calibrate on lenses without hard stops – such as photo-lens with follow focus gears.
  • Motors fit standard 15mm and 19mm Rods
  • Ideal for Gimbal, Drone, and Shoulder-mounted setups

 

Lieferumfang:

 
(1) Wireless FIZ Hand Unit
(2) Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings
(1) Wireless Handle Left (Focus)
(1) Wireless Handle Right (Iris, Zoom)
(4) Follow Focus marking disks
(1) 7-Pin to 740mm P-TAP Motor Power Cable
(1) 296mm 7-Pin to 7-Pin Straight Motor Connection Cable
(1) 180mm 7-Pin to 7-Pin Straight Motor Connection Cable
(1) 18650 4 Slot Battery Charger
(2) Handle to Arri Standard Rosette Adapter
(2) Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
(1) Wireless FIZ Hand Unit Strap
(1) Hard Shell Waterproof Safety Case

 

 

Spezifikatonen:

 
Color:
Gunmetal Grey

Material:
Aluminum-Alloy 
Stainless Steel
ABS Plastic 
Rubber
Brazilian Rosewood

Weight: 
FIZ Hand Unit (with focus disk but no batteries): 0.972 lb
FIZ Hand Unit (with focus disk and batteries): 1.164 lb

Right Handle Grip (no batteries or adapters): 0.582 lb
Left Handle Grip (no batteries or adapters): 0.529 lb

Arri Rosette Male to Handle Grip Adapter: 0.161 lb
25mm/30mm Gimbal to Handle Grip Adapter: 0.099 lb

Motor (no rail adapter): 0.419 lb
Motor with 15mm rail adapter: 0.496 lb
Motor with 19mm rail adapter: 0.487 lb

Motor Dimensions:
Length/Height: 4 1/2 Inches
Width: 2 3/4 Inches (motor plus rail adapter)
Width: 2 5/8 Inches (ports to tip of gear)
Width: 3 2/8 Inches (end to end furthest points)
Depth: 5/8 Inches (rail mount section)
Depth: 3/4 Inch (base section)
Depth: 1 3/8 Inches (motor section)
 
 

Wir empfehlen passend oder als Alternative

Tilta WLC-T03-HL Nucleus-M Handgrip (Left)
Tilta WLC-T03-K4 Nucleus-M Wireless Lens Control System Partial Kit IV
Nicht an Lager (Verfügbarkeit unbekannt)

Tilta Nucleus-Nano Micro USB to USB-C Nano Motor Power Cable

521.WLC-T03-K4

1'061.30 CHF
Tilta WLC-T03-K5 Nucleus-M Wireless Lens Control System Partial Kit V
Tilta WLC-T03-K3 Nucleus-M Wireless Lens Control System Partial Kit III